Skip to content
Mesabe

Mesabe Truck

Gear cut to
your truck.

Laser-cut and bent from aluminum sheet for the exact truck you drive, not a universal fit. Three parts, two trucks, at launch.

  • 2021+ Ford F-150
  • 2024+ Toyota Tacoma
A pickup bed at golden hour fitted with aluminum MOLLE-compatible bed-side panels, an aluminum bed divider and a tailgate table with cup holders
  • CAD render of the F-150 bed divider: one continuous aluminum panel with a handle slot, and a sliding end piece that sets the widthCAD render · F-150

    Bed divider

    One-piece panel, adjustable width

    One continuous 12 in aluminum panel spans the bed so cargo stops sliding. A sliding end piece sets the width over a 4 in range and locks with two tool-free knobs. No drilling.

    Launch price

    F-150 2021+
    $269
    Tacoma 2024+
    $249
  • CAD render of an F-150 MOLLE-compatible bed-side section: a flanged aluminum panel with two columns of long strap slots either side of a solid mounting stripCAD render · F-150

    MOLLE-compatible bed-side panels

    Long-slot pattern

    Flanged panels that mount along the inside of the bed walls. Long slots, 1 in tall and 6–7 in long, take 1-inch straps anywhere along the slot for pouches and gear.

    Launch price

    F-150 2021+
    $249 per side$449 pair
    Tacoma 2024+
    $229 per side$429 pair
  • CAD render of the F-150 tailgate table: one 40 in aluminum panel with two cup holes, a handle slot, a bent front lip and a hook-over back lipCAD render · F-150

    Tailgate table

    Single 40 in panel, 2 cup holes

    One 40 in aluminum panel hooks over the tailgate edge and gives you a flat work surface when the gate is down. Two cup holes, a carry handle and rubber feet. No drilling.

    Launch price

    F-150 2021+
    $299
    Tacoma 2024+
    $279

Finish: bare 5052 aluminum. One finish, no color options.

Launch price. Your $50 refundable deposit locks it in.

Pre-order · $50 refundable depositJoin the waitlist

Ships in 4–6 weeks. Launch pricing locked with a deposit.

How it works

From a sentence to a part in your hands.

Four steps. You do the first one.

  1. 01 / 04

    Describe it

    Tell us what you need and what it goes on, in plain words. Or pick a part we already make.

    You write

    Bed divider for my 2023 F-150, 5.5 ft bed. Fits between the wheel wells.

    mesabe.ai

    We turn it into a part spec

    • PartBed divider
    • Fits2021+ F-150, 5.5 ft
    • MaterialAluminum sheet
    • FinishBare 5052 aluminum

  2. 02 / 04

    We design it and check the fit

    We draw the part to your vehicle's dimensions and check the fit before anything is cut.

    A bed divider drawn inside the outline of a truck bed wall, with dimension lines

  3. 03 / 04

    Cut, bend, finish

    A fabrication partner laser-cuts the sheet, bends it on a press brake and deburrs it, leaving a bare brushed-aluminum finish.

    A laser cutting head cutting slots into brushed aluminum sheet, with sparks
    Cut
    A press brake punch bending an aluminum sheet into a V-die
    Bend
    A finished bare brushed-aluminum panel with slots and a bent edge
    Finish

  4. 04 / 04

    It ships to you

    It arrives flat-packed and ready to install. If it doesn't fit, we make it right.

    Brushed aluminum panels packed flat in a shipping box

The Fit Guarantee

Made to fit,
or we make it right.

  • 01

    Drawn to your vehicle

    We work from your vehicle's dimensions, not a one-size template.

  • 02

    Checked before it's cut

    Every design gets a fit check before any steel is cut.

  • 03

    Remade or refunded

    If it doesn't fit the vehicle you ordered it for, installed as instructed, we remake it or refund it.

Conditions and time limits apply.

Read the Fit Guarantee terms (draft)
A part drawn inside the outline of a truck bed wall, with yellow dimension linesFit check

Mesabe Truck · first batch

Reserve your spot.

$50

Refundable deposit

  • Holds a spot in the first production batch.
  • Locks in launch pricing.
  • Balance charged when your batch is ready to ship.
  • Refundable any time before production starts.

Ships in 4–6 weeks. If there's a delay, we'll tell you and offer a full refund.

Pick your truck and part

Secure checkout by Stripe. Card details never touch our servers.

Pick your truck and part to see the launch price.

Deposit terms (draft)

  • Ships in 4–6 weeks. If there's a delay, we'll tell you and offer a full refund.
  • The $50 deposit reserves a spot in the first production batch and locks in launch pricing.
  • The balance is charged when your batch is ready to ship.
  • Refundable any time before production starts.

Pre-orders aren't open yet. Join the waitlist and we'll email you when they are.

Product images are illustrative; final parts may vary slightly.

  • Made in USA, 5052 aluminum
  • Made to fit, or we make it right
  • $50 deposit, fully refundable before production
  • Secure checkout
Powered by Stripe
  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay

Cut and formed by US fabrication partners

Not ready to put money down?

Join the waitlist. No payment. We'll email you prices and dates first.

Which products?

We only use your email to tell you about Mesabe launches. You can leave any time.

FAQ

Straight answers.

Something we missed? Join the waitlist and reply to our first email.

What is Mesabe?
A made-to-order parts company. You describe what you need, we design it, check the fit and have it laser-cut, bent and finished by a fabrication partner. We're starting with truck gear.
Which trucks do you support?
At launch, the 2021+ Ford F-150 and the 2024+ Toyota Tacoma, across their cab and bed configurations. The launch line is a bed divider, MOLLE-compatible bed-side panels and a tailgate table. More trucks later.
How much will it cost?
Launch prices: bed divider $269 (F-150) or $249 (Tacoma). MOLLE-compatible bed-side panels $249 per side or $449 a pair (F-150), $229 per side or $429 a pair (Tacoma). Tailgate table $299 (F-150) or $279 (Tacoma). Your $50 refundable deposit locks in the launch price, and the balance is charged when your batch is ready to ship.
How does the bed divider fit?
It's a one-piece panel with an adjustable width. One continuous 12 in aluminum panel spans the bed, and a sliding end piece sets the width over a 4 in range. Two tool-free knobs lock it. No drilling.
What finish do the parts come in?
Every part is bare 5052 aluminum. There are no color options.
When will it ship?
Ships in 4–6 weeks. If there's a delay, we'll tell you and offer a full refund.
Can I get my deposit back?
Yes. It's refundable any time before production starts.
What if it doesn't fit?
That's the Fit Guarantee. If a part doesn't fit the vehicle you ordered it for, installed as instructed, we remake it or refund it. Conditions and time limits apply. Read the draft terms.
Are the pictures real products?
Not yet. Product images are illustrative: the product cards show CAD renders of the actual part designs, and the other scenes show the design direction. They aren't photos of shipped parts. Each part is made to order after we check the fit for your truck, so final parts may vary slightly from the pictures.
Are you affiliated with Ford or Toyota?
No. Mesabe is not affiliated with, endorsed by, or sponsored by Ford Motor Company or Toyota Motor Corporation. We use the truck names only to describe fitment.
Where does the name come from?
Named for the Mesabi Iron Range, from the Ojibwe misaabe, giant.